Although it may appear difficult, setting up your Canon Pixma MG3620 wirelessly is actually fairly easy if you follow the correct instructions. A seamless and trouble-free installation procedure is ensured by following this advice, regardless of whether you're connecting to a Windows PC, Mac, or mobile device. Let's go over how to set up the Canon Pixma MG3620 wirelessly in simple stages.

1. Open and Set Up Your Printer

• Remove all protective materials from your Canon Pixma MG3620 after unpacking it.

• Turn on the printer by plugging in the power wire.

• Fill the tray with paper after installing the ink cartridges.

• Verify that the printer's Wi-Fi bulb is glowing. If not, hold down the Wi-Fi button until a blue light appears.

2. Get the Canon Configuration Software

• Go to https ij start canon, the official Canon setup website.

• Drivers, setup tools, and instructions may be downloaded from this reliable Canon website.

• To download the software for your operating system (Windows, macOS, Android, or iOS), enter the model of your printer, "Pixma MG3620."

3. Set Up the Program

• Launch the downloaded file and adhere to the prompts displayed on the screen.

• Choose Wireless Connection as the mode of connection.

• Your printer will be found on the network by the setup program.

4. Establish a WiFi connection

• Choose your Wi-Fi network and provide the password when requested.

• Hold off until the link is made. The blue Wi-Fi light will remain constant.

• You now have a wifi connection to your Canon Pixma MG3620.

5. Printing Tests

• To make sure everything is operating flawlessly, print a test page.

• Documents may now be wirelessly printed, scanned, or copied from any connected device.

The Canon Pixma MG3620 wireless setup procedure is made quick and easy by using https ij start canon. During installation, make sure your Wi-Fi network is stable at all times. Once set up, printing from computers, tablets, and cellphones is simple and available at any time.

Visit our website to know more.