Laview Camera offline is not a reason to freak out; it is a common issue that usually comes from outdated setups, issues with setting up, or network connection problems. We present to you an elaborate guide on how to revive the online status of your Laview cameras.

1. Check the power and internet connections.

• Check the working of your Wi-Fi router.
• If necessary, reboot the modem and router to restore the connection.
• Confirm the Laview camera is getting a continuous power supply.

2. Check the connection of the device

• Check the correct way the camera is connected to the Wi-Fi.
• In the case of wired connection, check if the Ethernet cable is well plugged in.
• During Laview WiFi camera setup, make sure that your mobile device is using the same network.

3. Power off and on the camera

• Disconnect the camera from power and then connect it back to power to power cycle it.
• After a few minutes, check if the status has changed from "offline" to "online."

4. Update the firmware and Laview app

• Start the Laview app and check for updates
• If an update is available, install the new firmware to fix problems and improve the connection.

5. Change Laview WiFi Cam Configuration

• With the app open, remove the camera that is offline.
• Repeat the adding process using the Laview WiFi Camera Setup.
• Carefully follow the instructions for reconnecting to Wi-Fi.

6. If required, a factory reset Laview NVR

• Perform a reset if the issue persists.
• For NVR installations, if necessary, reset Laview NVR to factory settings.
• After the reset, re-add your cameras.

7. Confirm the router's settings

• Check that the router's firewall isn't preventing access to the camera.
• As most Laview cameras are incompatible with 5GHz, ensure 2.4GHz Wi-Fi is activated.

It is possible to solve the majority of Laview Camera Offline problems and bring back the security system to normal by using these methods. Regular updates and correct network maintenance can prevent future problems.

Visit our website for more information.